FIU Network Access >Other Devices> Supported Devices

In order to register your non-computer device on AIRS, you will first need to obtain its MAC address.  This is a unique 12-digit hexadecimal number which uniquely identifies your computer on the network.  Use the instructions below to help find you device's MAC address.  You may need to contact your device's vendor for additional information especially if your device is using a third-party network adapter.

If you believe support instructions for a particular device should be added to the list below, please feel free to contact UTS by visiting our website at http://uts.fiu.edu

If you already have your device's MAC address proceed to the registration instructions.

 

Nintendo Gamecube

  • Unplug the Gamecube and flip it over.
  • Remove the broadband adapter from the bottom of the Gamecube.
  • The MAC address is printed on the underside of the adapter.

Nintendo Wii

  • From the Wii Channel menu, select Wii Settings (the round button on the bottom-left of the screen with Wii on it).
  • Select Internet.
  • Select Console Settings.
  • The MAC address of the Wii console is displayed on the first line

Sony PlayStation 3

  • Power up the PlayStation 3 without any disc in the drive.
  • Once the PlayStation 3 operating system has loaded, select Settings.
  • Move down to Network Settings.
  • Select Settings and Connection Status List.
  • Copy the MAC address shown

Sony PlayStation 2

  • Disconnect the network cable from your PlayStation 2.
  • Insert the Start-up CD into your PlayStation 2 and power on the game console.
  • Follow the on-screen instructions until you reach the network connect test.  This test will fail as the network cable is disconnected.
  • Press the Select button on the controller.
  • The MAC address is displayed on the screen.

TiVo

  • Connect the external network adaptor to your TiVo.
  • Press the TiVo button to enter TiVo Central.
  • Select Messages & Settings.
  • Select Settings.
  • Select Phone & Network.
  • The MAC address is displayed near the top right of the screen.

Once your TiVo is registered, you might need to use the dialing prefix ",#401" during the initial setup process to force it to use the network rather then a phone line.

Xbox 360

  • Go to the System area of the Xbox Dashboard and select Network Settings.
  • Select Edit Settings.
  • Go to Additional Settings and select Advanced Settings
  •  The MAC address is displayed at the bottom of the screen under Wired MAC Address.